SmartBase for Power Outage Test

• Unplug the power cord from the SmartBase.
• You will receive a text message that SmartBase has detected a power outage.
• LED on SmartBase will turn white.

SmartBase test complete. Re-connect power cord.

Leak Detector Test

• Wet the tip of your finger with water and run your finger along the aluminium rings on the bottom of the leak detector.
• In a few seconds your leak detector will begin to alarm and the red LED on the cover near the Roost logo will blink.
• To stop the leak detector alarm from sounding, dry off the metal rings on the bottom of the detector thoroughly, especially the small space between them.
• Shortly after your Roost leak detector begins to alarm, you should receive a push notification on your smartphone alerting you that there has been a leak.
• If you don't receive a push notification or a text message within a minute, please check your phone settings to make sure you've allowed push notifications from the Roost App and test again.
• The leak detector with the tail will alert when water comes in contact with any portion of the tail.
• To stop the leak detector alarm from sounding, dry off the metal rings on the bottom of the detector thoroughly, especially the small space between them.

Leak detector test complete.