Smart base:
Event |
Type of Feedback |
Booted and connecting |
Base says, “Please wait, I am connecting” and light pulses blue |
Booted and successfully connected |
Base says, “I am connected” and light goes to solid blue |
Booted and failed to connect |
Base says, “Failed to connect. Please try again” and light changes to pulsing blue. |
Wi-Fi password error |
Base says, “Incorrect password” and light changes to Pulsing purple |
Wi-Fi not found |
Base says, “Wi-Fi could not be found” and light changes to pulsing purple |
Successful connecting to Wi-Fi |
Base says, “Wi-Fi Connected” and light changes to solid blue |
Unsuccessful to connect to Wi-Fi |
Base says, “ Wi-Fi failed to connect” and light changes to pulsing purple |
Pressing pairing button |
Light changes to Pulsing green, and eventually times out to solid blue |
Successful pairing to Base |
Base says the type of sensor I”s connected” and light changes to pulsing green |
System is in off mode and armed home is pushed |
Base says, “Armed home” and beeps. The light changes to solid red |
System is in off mode and away is pushed |
Base says, “Arming” and the exit delay beeps start. Light changes to pulsing red |
System fails to arm |
Base says, “Failed to arm” and gives the failure sound. Light pulses red two times |
System is in away and away is pushed |
Base says, “Armed Away” and the light changes to solid red |
System is in home and home is pushed |
Light changes to solid red |
System is in away and home is pushed |
Base says, “Disarm the system first” and plays the failure sound. Light changes to solid red |
System is armed (home or away) and correct code + off is pushed |
Base says, “Disarmed” and light changes to solid blue |
System is armed and wrong code + off is pushed |
Base says, “Wrong PIN code” and light changes to solid red |
A door is open and arm (home or away) is pushed |
Base says, “Failed to arm. Door is open” and plays the failure sound |
Door/Motion activity when armed (home or away) |
Base plays entry delay beeps and light changes to solid red |
Pressing pairing button when armed |
Base says, “Disarm to pair” and light changes to solid red |
Door opened when not armed |
Base plays the door open chime |
Pressing pairing button when powered by batteries |
Base says, “Connect SmartBase to power” and light changes to solid white |
Intruder detected |
Base plays loud alarm sound for 10 minutes. Light pulses red |
Panic Alarm sent (2 seconds hold) |
No change to lights or sounds |
Hostage Alarm sent |
No change to lights or sounds |
Smoke alarm detected |
Light changes to pulsing red |
Leak detected |
Light changes to pulsing red |
Freezing conditions detected |
Light changes to pulsing red |
Power outage detected (armed away) |
No light or sound |
Power outage detected (armed home) |
Light turns white for 5 minutes. Then goes dark. |
Power outage detected (disarmed) |
Light turns white for 5 minutes. Then goes dark. |
Loss of communications when armed |
Light changes to pulsing red |
Keypad:
Event |
Type of Feedback |
Leak/Freeze connects and was never paired before |
Blinking green until time out (10 minutes) |
Pairing button pushed for 1 second |
Blinking green until time out (10 minutes) |
Booted and failed to connect |
None |
Wi-Fi password error |
None |
Wi-Fi not found |
None |
Successful connecting to Wi-Fi |
None |
Unsuccessful to connect to Wi-Fi |
None |
Pressing pairing button |
None |
Successful pairing to Base |
None |
System is in off mode and armed home is pushed |
Keypad says, “Armed home”. Home button blinks green 4 times then solid green until time out (5 seconds) |
System is in off mode and away is pushed |
Keypad says, “Arming” and the exit delay beeps start. Away button blinks green 4 times then solid green until time out (5 seconds) |
System fails to arm |
Keypad says, “Failed to arm” and gives the failure sound. Warning LED blinks. |
System is in away and away is pushed |
Keypad says, “Armed Away” and the Away button blinks green until time out (5 seconds), then to solid red |
System is in home and home is pushed |
Keypad says, “System is armed” and Home button blinks green 4 times then solid green until time out (5 seconds) |
System is in away and home is pushed |
Keypad says, “Disarm the system first” and plays the failure sound. The warning light changes to solid red. |
System is armed (home or away) and correct code + off is pushed |
Keypad says, “Disarmed” and the Off button blinks green 4X then solid green |
System is armed and wrong code + off is pushed |
Keypad says, “Wrong PIN code” and the warning light changes to solid red |
A door is open and arm (home or away) is pushed |
Keypad says, “Failed to arm. Door is open” and plays the failure sound. Warning light changes to solid red. |
Door/Motion activity when armed (home or away) |
None |
Pressing pairing button when armed |
None |
Door opened when not armed |
None |
Pressing pairing button when powered by batteries |
None |
Intruder detected |
None |
Panic Alarm sent (2 seconds hold) |
None |
Hostage Alarm sent |
None |
Smoke alarm detected |
None |
Leak detected |
None |
Freezing conditions detected |
None |
Power outage detected (armed away) |
None |
Power outage detected (armed home) |
None |
Power outage detected (disarmed) |
None |
Loss of communications when armed |
None |
Water leak/freeze:
Event |
LED behavior |
Leak/Freeze connects and was never paired before |
Blinking green until time out (10 minutes) |
Pairing button pushed for 1 second |
Blinking green until time out (10 minutes) |
Leak detected |
Blink red for the duration |
Entry Sensor:
Event |
LED behavior |
Door/Window connects and was never paired before |
Blinking green until time out (10 minutes) |
Pairing button pushed for 1 second |
Blinking green until time out (10 minutes) |
Activity detected |
Blink red once |
Motion Sensor:
Event |
LED behavior |
PIR connects and was never paired before |
Blinking green until time out (10 minutes) |
Pairing button pushed for 1 second |
Blinking green until time out (10 minutes) |
Activity detected |
Blink red once |