SmartBase
Event |
Device Action |
Initial Start Up or Reset |
Base will say, "Please wait, I am connecting." and blink blue. |
Booted, Success |
Base will say, "I am ready to go." and turn solid blue. |
Booted, Failed to Connect |
Base will say, "I am unable to connect." and turn to solid red. Contact Support for further assistance. |
Wi-Fi Password Incorrect / Wi-Fi Unavailable |
Base will say, "Wi-Fi Could not be found." |
Successful Wi-Fi Connection |
Base will say, "Wi-Fi Connected." and turn solid blue. |
Wi-Fi Connection Failed |
Base will say "Wi-Fi Connection Failed." |
Pair Mode Button is pressed |
Light changes to blinking green (Pairing Mode), continued holding will turn to blinking purple (Wi-Fi Provisioning Mode). |
Sensor is successfully paired to SmartBase |
Base will say "(Sensor name) is Connected." |
Pair Mode Button is pressed while Armed |
Base will say "Disarm to Pair." |
Pair Mode Button is pressed while on Battery Backup |
Base will say "Connect SmartBase to Power", light changes to solid white. |
System is in Off Mode and Away is pressed on the Keypad |
The Base will begin a countdown of Entry Delay Beeps. |
System Fails to Arm |
Light pulses red two times. |
System is Armed Home |
Light changes to solid red. |
System is Disarmed |
Light changes to solid blue. |
Entry Sensor Activated while Unarmed |
Base plays the door open chime |
Intruder Detected |
Base will play a loud alarm for 10 minutes. Light blinking red. |
Panic Alarm / Hostage Code Entered |
No change to lights or sounds, dispatch contacted. |
Leak is Detected |
Light changes to blinking red |
Freezing Conditions Detected |
Light changes to blinking red |
Power Outage Detected (Armed Away) |
No changes to light or sound. |
Power Outage Detected (Armed Home/Disarmed) |
Light will turn white for 5 minutes, then go dark. |
Wi-Fi / Cellular Communication lost while Armed |
Light changes to blinking red. |
Keypad
Event |
Device Action |
Pairing Pinhole is Pressed |
Keypad will blink green for 10 minutes. |
Armed Home is Pressed |
Keypad will say "Armed Home". |
Armed Away is Pressed |
Keypad will say "Arming", and begin Entry Delay Beeps. |
System Fails to Arm |
Keypad will say, "Failed to Arm." |
System is Armed Away and Home is Pressed |
Keypad will say, "Disarm the System First." |
System is Successfully Disarmed |
Keypad will say, "Disarmed", and the Off button blinks green 4 times. |
The Wrong PIN Code is Entered on Keypad |
Keypad will say, "Wrong PIN Code," |
Attempting to Arm System while Entry Sensor is Open |
Keypad will say, "Failed to Arm, Door is Open." |
Water/Temperature Sensor
Event |
Device Action |
Sensor is Paired / Pair Button is Pressed |
Sensor will blink green for 10 minutes. |
Moisture Is Detected |
Sensor will blink red for the duration. |
Entry Sensor
Event |
LED behavior |
Sensor is Paired / Pair Button is Pressed |
Sensor will blink green for 10 minutes. |
Activity detected |
Blink red once |
Motion Sensor
Event |
LED behavior |
Motion Sensor is Paired / Pairing pinhole is pressed |
Sensor will blink green for 10 minutes. |
Activity detected |
Blink red once |